Visit us at www.stauer.com
learn more about the fantastic
benefits of owning a Stauer Watch!
A - Start/Stop Button
B - Crown
C - 24-Hour Dial
D - Split/Reset Button
E - Date Window
F - Chronograph Second Dial
G - Chronograph Minute Dial
H - Compass Button
I - Inner Compass Dial
J - Second Hand
O SET THE TIME
Pull the cr own (part B) out to position “2”
and rotate it to the desired time.
Once the correct time is set, push the
crown back into “0” (zero) position.
Second Hand (part J) will start to run.
O SET THE DA TE
Pull the cr own (part B) out to position
“1” and rotate it clockwise (away from you) to
the desired date (part E).
Once the correct date is set, push the cro wn
back into “0” (zero) position.
The date should not be adjusted
between the hours of 9pm and 1am.
The Compass Button (part H) rotates
the Inner Compass Dial (part I).
O SET THE CHRONOGRAP H
This chronograph is able to measure and
display time in 1 second increments up to
a maximum of 59 minutes (part H) and
59 seconds (part F).
T o start the Chronograph feature, pr ess
top Button (part A). T o measur e
split times press the S
plit/Reset Button (part
D) to stop counting.
Pr ess the Split/R eset Button (part D) to
reset the chronograph, and the Second H
(part J), the Chronograph Minute Dial (part
G) and the Chronograph Second Dial (part F)
will all return to the zero position.
F or split time, press the S plit/Reset Button
(part D) again after stopping the chronograph
to restart the chronograph function.
press the S
tart/Stop Button (part A) to stop ,
and the Split/R
eset Button (part D) to reset.
When resetting the chronograph, only return
the crown (part B) to the normal “0” (zero)
position when the second hand (part J) is
in the 12 o
’clock position. The second hand
stops when the crown is pushed in to the
“0” (zero) position and that position is then
recognized as the “0” (zero) position.
- Precision movement
- Chronograph function
- 24-hour military time subdial
- Date window
Stainless steel case, back, and band
- Water resistant to 3 ATM
USING THE CHRONOGRAPH
Chronograph Reset (includes after
replacing the battery)
Pull the cr own (part B) out to position “2”.
Pr ess the Start/S top Button (part A) to set
the Chronograph Second Hand (part F) to the
The chronograph hand can be
advanced rapidly by continuously pressing the
top Button (part A).
Once the Chronograph Second Hand
(part F) has been set to the zero position,
push the crown (part B) back into “0” (zero)