StarTech.com MOD4AVHD

StarTech.com MOD4AVHD manual

(1)
  • Quick-Start Guide
    Manual Revision: 11/09/2018
    Product Diagram
    Actual product may vary from photos.
    Front View
    Rear View
    Package Contents
    A/V Module x 1
    Universal Power Adapter x 1
    Power Clips (NA, EU, UK) x 3
    Mounting Bracket x 1
    Mounting Bracket Screws (M5 x 20 mm) x 4
    Module Screws (#6-32 x 3/16”) x 8
    Quick-Start Guide x 1
    SKU #: MOD4AVHD
    A/V Connectivity Module for BOX4MODULE and BEZ4MOD
    Requirements
    Power Source (i.e. AC Electrical Outlet)
    Installation Requirements:
    Mounting Surface
    Mounting Bracket x 1
    Mounting Bracket Screws (M5 x 20 mm) x 4
    Module Screws (#6-32 x 3/16”) x 4
    Writing Utensil x 1
    Phillips Head Screwdriver x 1
    For the latest requirements, please visit:
    www.startech.com/MOD4AVHD.
    Installation
    See the Installation section in the Modular Conference Table
    Box (BOX4MODULE) or Single-Module Conference Table Box
    (BEZ4MOD) User Manual for instructions on how to install a
    Module.
    These User Manuals can be found under the Support tab at:
    www.startech.com/BOX4MODULE
    www.startech.com/BEZ4MOD
    (Optional) Mounting the Module
    Note: StarTech.com is not responsible for any damages related to
    the installation of this product.
    Note: Before mounting the Module, consider the desired
    orientation of the ports (front and rear).
    1. Align the Mounting Bracket with four Mounting Holes on the
    Module.
    Note: There are four Mounting Holes on each side of the
    Module, which gives you two dierent mounting options.
    2. Insert the Module Screws (x4) through the Mounting Bracket
    and into the Mounting Holes.
    3. Tighten the Module Screws using a Phillips Head Screwdriver.
    Do not overtighten the Module Screws.
    4. Before installing the Mounting Bracket on or under your
    Mounting Surface, measure and position the Mounting
    Bracket in the desired location. The Module can be mounted on
    a vertical or horizontal Mounting Surface.
    5. (Optional) Depending on the Mounting Surface you are using
    to install the product, you may need to drill pilot holes prior to
    installing the Mounting Bracket Screws into the Mounting
    Surface.
    6. Mark the location of the Mounting Holes using a Writing
    Utensil. These marks can be used as a guide to indicate where
    the Mounting Bracket Screws will be installed in the surface.
    7. Install the Mounting Bracket Screws (x4) through the Mounting
    Bracket and into the Mounting Surface, using a Phillips Head
    Screwdriver. Do not overtighten the Mounting Bracket Screws.
    Warning: To prevent the Mounting Bracket Screws from
    penetrating the opposite side of the Mounting Surface, be
    conscious of the length of the Mounting Bracket Screws
    compared to the depth of the Mounting Surface.
    For the latest information, specications, and support visit www.startech.com/MOD4AVHD
    Power
    LED
    Reset
    Button
    RJ45
    Passthrough
    Port
    VGA In
    Port
    Audio
    In Port
    HDMI
    In Port
    DisplayPort
    In Port
    RJ45
    Passthrough
    Port
    HDMI
    Out
    Port
    Audio
    Out
    Port
    DC
    5V 2A
    Port
    VGA In
    Port
    Audio
    In Port
    HDMI
    In Port
    DisplayPort
    In Port
StarTech.com MOD4AVHD

Brug for hjælp?

Antal spørgsmål: 0

Har du et spørgsmål om StarTech.com MOD4AVHD eller har du brug for hjælp? Stil dit spørgsmål her. Giv en klar og omfattende beskrivelse af problemet og dit spørgsmål. Jo flere oplysninger du giver om dit problem og dit spørgsmål, jo lettere er det for andre StarTech.com MOD4AVHD ejere at svare korrekt på dit spørgsmål.

Se manualen til StarTech.com MOD4AVHD her gratis. Denne vejledning hører under kategorien Ikke kategoriseret og er blevet bedømt af 1 personer med et gennemsnit på en 5.2. Denne manual er tilgængelig på følgende sprog: Engelsk. Har du et spørgsmål om StarTech.com MOD4AVHD eller har du brug for hjælp? Stil dit spørgsmål her

StarTech.com MOD4AVHD specifikationer

Mærke StarTech.com
Model MOD4AVHD
Produkt Ikke kategoriseret
EAN 0065030871228
Sprog Engelsk
Filtype PDF
Funktioner
Godkendelse CE, FCC, REACH
Overholder RoHS
LED-indikatorer Strøm
Farve på produkt Sort
Chipsæt Parade - PS176, Chrontel - CH7035, Explore Micro - EP9442U, TI - TS3DV642
Porte & Grænseflader
USB pass-through
HDMI-version 1.4
DisplayPort-version 1.2
Antal HDMI-indgangsporte 2
Antal HDMI-udgangsporte 1
VGA (D-Sub) indgangsporte 2
Antal DisplayPorts 2
Ethernet LAN-porte (RJ-45) 2
Lydindgang 2 x 3.5 mm
Lydudgang 1 x 3.5 mm
Video
Understøttede billedformater 16:9
Maksimal opløsning 3840 x 2160
Understøttede grafikopløsninger 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 3840 x 2160
Strømstyring
Indgangsspænding for vekselstrømsadapter 100 - 240
Udgangsspænding for vekselstrømsadapter 5
Vekselstrømsadapterens udgangsstrøm 2
Indgangsstrøm 0.4
Ekstern strømforsyning
Strømforbrug (normal) 10
Strømstik type Type M
Driftsbetingelser
Driftstemperatur (T-T) 0 - 60
Opbevaringstemperatur (T-T) -20 - 60
Relativ luftfugtighed ved drift (H-H) 10 - 85
Vægt & størrelser
Bredde 105
Dybde 110
Højde 60
Vægt 200
Pakkevægt 200
Pakke højde 210
Pakke dybde 250
Pakke bredde 100
Emballage indhold
AC-adapter inkluderet
Monteringsbeslag inkluderet
Skruer inkluderet
Hurtig start guide
Netværk
Ethernet LAN

Relaterede produktmanualer

Ikke kategoriseret StarTech.com

Vi anvender cookies for at sikre at vi giver dig den bedst mulige oplevelse af vores website. Hvis du fortsætter med at bruge dette site vil vi antage at du er indforstået med det.

Læs mere