Quick Start Guide
Checking the supplied
Inserting batteries into
the remote control
Connecting the TV
Thank you for choosing this Sony
This step by step guide will help you to:
Insert batteries into the remote control.
Connect the aerial to your TV.
Connect a video cassette recorder (VCR) to your TV.
Switch on your TV.
Tune your TV.
View TV programmes.
RF Loopthrough cable
Remove the battery cover by
pushing down on the cover and
sliding in the direction shown.
Insert the batteries as
indicated in the battery
Replace the battery cover.
Always remember to dispose of batteries in an environmentally friendly way.
Connect your existing aerial lead to the digital socket marked on the rear of
the TV as shown.
Connect the supplied RF loopthrough cable from the socket marked to the
analogue socket marked .
Connect your existing aerial lead to the digital socket marked on the rear of the
TV as shown.
Connect the supplied RF loopthrough cable from the lower socket marked on
the TV to the RF IN socket on your VCR.
Connect a lead from the RF OUT socket of your VCR to the analogue socket
marked on the TV.
Connect a scart lead from the socket marked on the rear of the TV to
the scart socket on your VCR (refer to your VCR instruction manual).
Connect the VCR to the mains socket and switch on.
Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This enables
the TV to locate and store the video channel during the ‘Automatically tuning the
Connecting an aerial only
Rear of VCR
Existing aerial lead
Connecting an aerial and VCR