Sigma 10-20mm f4-5.6 EX DC HSM

Sigma 10-20mm f4-5.6 EX DC HSM manual

(1)
  • Thank you very much for purchasing a Sigma Lens. In order to get the maximum
    performance and enjoyment out of your Sigma lens, please read this instruction booklet
    thoroughly before you start to use the lens.
    DESCRIPTION OF THE PARTS (fig.1)
    Filter Attachment Thread
    Focus Ring
    Distance Scale
    Focus Index Line
    Zoom Ring
    Focus Mode Switch
    (SIGMA SA / CANON AF / FOUR THIRDS)
    Mount
    Lens Hood
    DC LENS
    These are special lenses that are designated for digital cameras because the lens image
    circle is designated to correspond to the size of the image sensors of most digital SLR
    cameras. The specialized design gives these lenses the ideal properties for digital cameras.
    An image sensor element larger than those corresponding to APS-C cannot be used in
    digital cameras or 35mm SLR cameras. If such an element is used vignetting will occur
    on the picture surface.
    If you use SD14, SD10 or SD10 digital cameras, corresponding angle of view will be
    17-34mm.
    ATTACHING TO CAMERA BODY
    When this lens is attached to the camera body it will automatically function in the same way
    as your normal lens. Please refer to the instruction booklet for your camera body.
    On the lens mount surface, there are a number of couplers and electrical contacts.
    Please keep them clean to ensure proper connection. To avoid damaging the lens, be
    especially sure to place the lens with its front end down while changing the lens.
    Many accessories such as rear mounted teleconverters, extension tubes, etc., are
    specially made for designated lenses. Before you purchase such accessories, please
    check your Sigma lens to determine that it is compatible and that the accessories will
    function properly with it.
    SETTING THE EXPOSURE MODE
    The sigma lens functions automatically after mounting to your camera. Please, refer to the
    camera instruction book.
    FOCUSING AND ZOOMING
    FOR SIGMA AF, CANON AF, NIKON AF AND FOUR THIRDS
    This lens features Sigma’s built-in Hyper Sonic Motor (HSM). The HSM enables quick and
    quiet autofocusing.
    For autofocus operation, set the focus mode switch on the lens to AFposition (fig.2) (for
    Nikon AF, select the autofocus mode on your camera body) (For Four-Thirds, select the
    autofocus mode on your camera body and set the focus mode switch on the lens to the
    AFposition).
    If you wish to focus manually, set the focus mode switch on the lens to the Mposition.
    (for Nikon AF, select the manual focus mode on your camera body as you would do
    normally) (For Four-Thirds, select the manual focus mode on your camera body and set the
    focus mode switch on the lens to theMposition). You can adjust the focus by turning the
    focus ring.
    This lens also permits manual focusing even in the autofocus mode. With the camera
    set to the One-Shot AF (AF-S) mode, you can adjust focus manually after the lens
    autofocus (and stops), while the shutter button is pressed halfway. (In the case of
    Four-Thirds fitting, the setting method varies depending on the camera body. Please
    follow the instruction manual of your camera body.)
    When operating this lens in manual focus mode, it is recommended that correct focus be
    confirmed visually in the viewfinder rather than relying on the distance scale. This is due
    to possible focus shift resulting from extreme changes in temperature which cause
    various components in the lens to expand and contact. Special allowance is made for
    this at the infinity setting.
    FOR SONY AF AND PENTAX AF
    For autofocus operation, set the camera’s focus mode to AF.
    If you wish to focus manually, set the cameras focus mode to “MF” and adjust the focus by
    turning the focus ring.
    To avoid damaging AF mechanism, please do not turn the focus ring manually while in
    the autofocus mode.
    When operating this lens in manual focus mode, it is recommended that correct focus be
    confirmed visually in the viewfinder rather than relying on the distance scale. This is
    due to possible focus shift resulting from extreme changes in temperature which cause
    various components in the lens to expand and contact. Special allowance is made for
    this at the infinity setting.
    ZOOMING
    Rotate the Rubber grip on the zoom ring to the desired position.
    LENS HOOD
    A bayonet type detachable hood is provided with the lens. This lens hood helps to prevent
    flare and ghosted images caused by bright illumination from outside the picture area.
    Attach the hood and turn clockwise until it stops rotation. (fig.3)
    In order to place the lens and hood into the storage case, you must first remove the
    hood, then replace it on the lens in the reverse position. (fig.4)
    FLASH PHOTOGRAPHY
    Built-in flash of your camera may not cover angle of view of this lens, and this may cause
    light fall-off at the corners. When external flash is used, flip wide panel of your flashgun
    down to cover flashs head, before taking picture.
    (This may not work with some flashguns, please test your equipment shootings
    beforehand)
    FILTER
    Only one filter should be used at the time. Two or more filters and/or special thicker
    filters, like a polarizing filter, may cause vignetting.
    When using a polarizing filter with AF camera, use the circulartype.
    BASIC CARE AND STORAGE
    Avoid any shocks or exposure to extreme high or low temperatures or to humidity.
    For extended storage, choose a cool and dry place, preferably with good ventilation. To
    avoid damage to the lens coating, keep away from mothballs or naphthalene gas.
    Do not use thinner, benzine or other organic cleaning agents to remove dirt or finger
    prints from the lens elements. Clean by using a soft, moistened lens cloth or lens tissue.
    This lens is not waterproof. When you use the lens in the rain or near water, keep it
    from getting wet. It is often impractical to repair the internal mechanism, lens elements
    and electric components damaged by water.
    Sudden temperature changes may cause condensation or fog to appear on the surface
    of the lens. When entering a warm room from the cold outdoors, it is advisable to keep
    the lens in the case until the temperature of the lens approaches room temperature.
    TECHNICAL SPECIFICATIONS
    Lens construction 10 - 14
    Angle of View 102.4 63.8°
    Minimum Aperture 22
    Minimum Focusing Distance 24cm (0.79 ft)
    Magnification 1:6.7
    Filter Size 77mm
    Dimensions Dia.×Length 83.5×81mm (3.3×3.2 in)
    Weight 465g (16.4 oz)
    Dimensions and weight include the SIGMA mount.
    The CE Mark is a Directive conformity mark of the European
    Community (EC).
    SIGMA (Deutschland) GmbH Carl-Zeiss-Str. 10/2, D-63322 Rödermark, F.R.GERMANY
    Verkauf: 01805-90 90 85-0 Service: 01805-90 90 85-85 Fax: 01805-90 90 85-35
    ENGLISH
Sigma 10-20mm f4-5.6 EX DC HSM

Brug for hjælp?

Antal spørgsmål: 0

Har du et spørgsmål om Sigma 10-20mm f4-5.6 EX DC HSM eller har du brug for hjælp? Stil dit spørgsmål her. Giv en klar og omfattende beskrivelse af problemet og dit spørgsmål. Jo flere oplysninger du giver om dit problem og dit spørgsmål, jo lettere er det for andre Sigma 10-20mm f4-5.6 EX DC HSM ejere at svare korrekt på dit spørgsmål.

Se manualen til Sigma 10-20mm f4-5.6 EX DC HSM her gratis. Denne vejledning hører under kategorien Linser og er blevet bedømt af 1 personer med et gennemsnit på en 7.5. Denne manual er tilgængelig på følgende sprog: Engelsk. Har du et spørgsmål om Sigma 10-20mm f4-5.6 EX DC HSM eller har du brug for hjælp?

Sigma 10-20mm f4-5.6 EX DC HSM specifikationer

Mærke Sigma
Model 10-20mm f4-5.6 EX DC HSM
Produkt Linse
Sprog Engelsk
Filtype PDF
Linsesystem
Objektivstruktur (elementer/grupper) 14/10
Diagonal synsvinkel (maks.) 102.4
Antal membranblade 6
Nærmeste fokuseringsafstand 0.24
Mindste blænderåbnimg tal 4
Maksimale blænderåbning tal 22
Vægt & størrelser
Filterstørrelse 77
Vægt 465
Længde 81
Diameter 83.5
Andre funktioner
Forstørrelse 1:6.7
Præstation
Kompabilitet DG UV 77mm
DG WIDE CIRCULAR PL 77mm
LH825-04
Design
Farve på produkt Sort

Relaterede produktmanualer

Linse Sigma

Vi anvender cookies for at sikre at vi giver dig den bedst mulige oplevelse af vores website. Hvis du fortsætter med at bruge dette site vil vi antage at du er indforstået med det.

Læs mere