Her kan du gratis se Pyle Surf Sound Talk manual. Har du læst manualen, men fik du ikke besvaret dit spørgsmål? Så stil dit spørgsmål på denne side til andre Pyle Surf Sound Talk ejere.
While unit is powered off,press&together untilsounds
a signal with red light.
(with green LED on), you can hear the sound via handset.
1.To turn on the product, hold for around 7 seconds, a signal will sound
‘BEEP~” keep pressing until the red & blue light is ﬂashing, and you hear the
sound ‘BIBI’, this notiﬁes you that it is ready to be paired.
2.The ﬁrst time the unit is paired, use your device to search for the product model
3.When your device ﬁnds the product model, press to connect, your device will
show if it is successfully connected or not.
4.If it is successfully connected, you can play music through the product.
Note: Terminate any connection between the product and any device before starting the paring procedure.
The pairing procedure cannot be started while a Bluetooth connection is established between the product
and a registered device. Terminate the connection and turn off the product.
Bluetooth Wireless Waterproof Shower Speaker & Hands Free
The waterproof level of this product complies with IP47 standards, it is designed to ensure
normal operation in water at a speciﬁed conditions.
DC cable in
Before using this unit:
Bluetooth versionBluetooth V2.1 +EDRA2DP and AVRCP
Operating range (maximum)
32 feet (The transmission distance
changed depending on theenvironment
where the product is used.
Power supplyBuilt in Li-Polymer
Battery Capacity 3.7V/ 800mAh
Current consumption: 200mA (Max)
Continuous standbytime: #180 Hours
Continuous transmission time: #8 hours
#The actual continuous standby/transmission times may become shorter than those in the speciﬁcations
depending on theenvironment or conditions for keeping/using theunit, etc.
#Battery degrades in time. The battery service time gradually decreases after charging and discharging
several cycles, even if the batteries are used properly.
#Thebattery performance deteriorates quickly if the unit is kept under high temperature conditions. Please keep
the unit in a cool, well-ventilated location, away from direct sunlight.
Operating Temperature: 90 °F to – 40 °F
Operating humidity range:
20-80% (no condensation)
2.5"(W) x 5.9"(H) x 1.6"(D) inch
Number of devices that can be
2 IN 1 WATERPROOF BLUETOOTH SPEAKER + HANDSET2 IN 1 WATERPROOF BLUETOOTH SPEAKER + HANDSET2 IN 1 WATERPROOF BLUETOOTH SPEAKER + HANDSET2 IN 1 WATERPROOF BLUETOOTH SPEAKER + HANDSET2 IN 1 WATERPROOF BLUETOOTH SPEAKER + HANDSET
Charging the battery:
Charging the battery from your PC via the USB charging cable, included
in the package.
The LED lamp will be red while the battery is charging.
The LED lamp will be off when the battery is fully charged.
It takes around 1.5 hours to fully charge the batterys
1.Connect the USB charging cable to the unit
2.Connect the USB charging cable to your PC
* when he battery power is depleted , a beeping alarm will sound, and the LED
lamp will blink red. After a while, product will turn off
Pairing the product with your device:
When nine or more devices are registered, the previously registered devices will be
deleted starting from the oldest, to register new ones. A device that is registered twice
or more is identiﬁed as one device.
to increase the volume. (when up to maximum, it will sound a‘Beep~’
to decrease the volume. (when up to minimum, it willsound a‘Beep ~'
to restart the current track. Press twice to play previous track.
Up to eight Bluetooth devicescan be registered:
Press to play next track.
to pause/ play the track.
1. when it is lit green LED, sound source play via handset
2. when it is not lit, sound source plays via speaker
for 7 seconds to turn off connection of Bluetooth
Part 1: pick up call:
1. For incoming call, press
to pick up the call, you will hear sound via speaker
(with green LED on), you can hear the sound via handset. Press
(with green LED light off) to switch the sound source to speaker
3. Whenever you are hearing sound source via speaker or handset, you can
to adjust the sound source volume.
once to mute sound,pressonce again to return tonormal.
5. Afterﬁnish the conversation, please
to hang up.
**Note: To avoid / reduceecho, please do not turn the speaker to maximum volume.
** The blue light will be blinking for all incoming call.
** The blue light will be blinking when talking via speaker
** The green light button willlitup when talking via handset
Part 2: Make a call:
1.Hold for 2 seconds to redial the latest call you make.
2.Some smartphones have voice command, press
once to entervoice
command function with your smartphone. For details , please refer your
smartphone instructions. This feature may bedifferent depending on your
3.After you areﬁnished with the conversation, press
to hang up.
Part 3: Pick up another incoming call:
1.While you are talking over the phone and haveanother incoming call, press
twice to pick up incoming call.
to switch to the other party.
to hang up the phone
Part 4 reject incoming call:
1.While unit isringing with incoming call, hold
to reject the call.
2.If you are playing the song, press
once again to continueplaying the song.
Speaker & handset sound source switching:
(with green LED light off) to hear the sound via speaker
Initializing the registration history / resetting the hardware of product:
Please take full precautions when setting the ringtone volume.
When this product is paired with a mobile phone, a loud ringtone may startle
you, which in turn may result in an accident or a heart attack, Gradually increase
the volume from the minimum to set it appropriately.
Do not damage cables that are connected to this product.
Firemay result from damaged cables.
Never leave this product in a car.
Leaving this product in a hot carfor many hours willresult in rupture of the
built-in battery, sparking, and other dangers, posing signiﬁcant danger.
Do not leave this productunder high temperature conditions.
This product is a precision electronic device. Avoid using/ keeping this product
in a location that is subject to high temperature, high humidity or direct sunlight
for many hours. When subject to signiﬁcant temperaturechanges in the
environment, this product may malfunction due to condensation inside the
Do not touch the metal parts of this product such as the power supply
connectors and the charging cable’s connector terminals.
Static electricity or fouling may cause a malfunction or electric shock.
Do not disassemble this product.
Do not repair, modify or disassemble this product on your own, unless
operational instructions to the contrary are given in this user’s manual, Electric
shock, ﬁre, or burns may result.
Make sure to close the watertight cap when using this product in a wet or
Make sure to remove any dust, hair, etc., that is present between the
watertight cap and the main unit.
Follow the user’s manual instructions of devices (ex. iPhones and mobile
phones) to be connected to this product.
This product can be wirelessly connected to iPhones, mobile phones, etc. The
setting procedures and precautions are different depending on the devices to be
connected to this product. Carefully readthe user’s manual for these devices
and observe any precautions.
Do not use/keep this product in a wet or damp environment for a long time
if you do not use it.
Any liquid entering this product may result in danger , ﬁre, or electric shock.
Do not keep this product within reach of small children.
Unexpected accidents (ex. accidental ingestion) may result.
This product is a precision electronic device. Avoid using/keeping this
product in an environment that is subject to impact/vibration, strong
magnetic forces, static electricity, etc.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the warranty.
NOTE:This equipment has been tested andfound to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
However, there is no guarantee that interferencewill not occur in a
particular installation. If this equipment does cause
to radio or television reception, which can be determined by turning the
equipment offandon, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SIZE: 411(W) X 279(H)mm
SIZE: 411(W) X 279(H)mm
This product is of waterproof construction with quality sound that will enrich your
shower time, enjoy your favorite music, anywhere and anytime. This Bluetooth
wireless system can be easily paired with most Bluetooth devices (such as tablets,
notebooks, smartphones, PCs, etc.). Also, built - in microphone enables you to talk
on thephone while you are showering.
Please ensure that the watertight cap of the DC plug is securely closed
before using this unit. Damage can happen to unit by water seeping into the unit
from to loosely closed watertight cap.
Water droplets that enter the speaker or microphone holes do not cause damage.
However, the product performance may temporarily decrease until the water droplets are
dried. Problems may include unclear sound and microphone insensitivity. If such
circumstances exist, please remove water droplets and dry the product