HiLook IPC-P120-D/W manual

Her kan du gratis se HiLook IPC-P120-D/W manual. Har du læst manualen, men fik du ikke besvaret dit spørgsmål? Så stil dit spørgsmål på denne side til andre HiLook IPC-P120-D/W ejere.

1
3
4 5
6
Appearance
*使用产品前请仔细阅读快速操作指南,并妥善保管
UD09755B
Name
Descripon
Status
Indicator
WPS/RESET WPS: Set Wi-Fi connecon via WPS (Wi-Fi
Protected Setup) funcon.
RESET: Hold down the buon for 4 seconds
when the camera is running.
Memory
Card Slot
For micro SD card. If a memory card is used,
video files will be stored in the memory card.
You would need to inialize it in the
Hik-Connect app.
Micro USB for power supply, 5V . Plug the
power cable into the power input interface to
power on the camera.
Steady red: The camera is starng up.
Flashing blue: The camera is started, and is
ready for Wi-Fi set-up.
Steady blue: Wi-Fi configuraon is completed
and the camera is running properly.
Flashing red: network communicaon is
abnormal.
1
Install memory card (oponal).
Adjust the lng posion of the camera to
expose the removable cover.
.
.
.
Quick Start Guide
COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co., Ltd. ALL RIGHTS RESERVED.
Any and all informaon, including, among others, wordings, pictures, graphs are the properes of
Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinaer referred to be
“Hikvision”). This user manual (hereinaer referred to be “the Manual”) cannot be reproduced,
changed, translated, or distributed, parally or wholly, by any means, without the prior wrien
permission of Hikvision. Unless otherwise spulated, Hikvision does not make any warranes,
guarantees or representaons, express or implied, regarding to the Manual.
About this Manual
The Manual includes instrucons for using and managing the product. Pictures, charts, images and
all other informaon hereinaer are for descripon and explanaon only. The informaon
contained in the Manual is subject to change, without noce, due to firmware updates or other
reasons. Please find the latest version in the company website (hp://overseas.hikvision.com/en/).
Visit the company website (hp://overseas.hikvision.com/en/) to get the manuals, client soware,
and developing tools.
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other HiLook’s trademarks and logos are the properes of Hikvision in various
jurisdicons. Other trademarks and logos menoned below are the properes of their respecve
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS
HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE,
AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL HIKVISION, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL
OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER
ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL
PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS
THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED
WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Network Mini PT Camera
Quick Start Guide
2
Regulatory Informaon
FCC Informaon
Please take aenon that changes or modificaon not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance:This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a residenal installaon. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular installaon. If this
equipment does cause harmful interference to radio or television recepon, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
FCC Condions
This device complies with part 15 of the FCC Rules. Operaon is subject to the following two
condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
EU Conformity Statement
Power
Input
Installaon
.
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
EMC Direcve 2014/30/EU, the RoHS Direcve 2011/65/EU, Radio Equipment Direcve
2014/53/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collecon points. For more informaon see:
www.recyclethis.info.
2006/66/EC (baery direcve): This product contains a baery that cannot be disposed
of as unsorted municipal waste in the European Union. See the product documentaon
for specific baery informaon. The baery is marked with this symbol, which may
include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the baery to your supplier or to a designated collecon point. For
more informaon see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s). Operaon is subject to
the following two condions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitaon est autorisée aux deux condions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est suscepble d'en compromere le fonconnement.
Under Industry Canada regulaons, this radio transmier may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmier by Industry Canada. To reduce
potenal radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communicaon.
Conformément à la réglementaon d'Industrie Canada, le présent émeeur radio peut
fonconner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émeeur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à
l'intenon des autres ulisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communicaon sasfaisante.
This equipment should be installed and operated with a minimum distance 20cm between the
radiator and your body.
Cet équipement doit être installé et ulisé à une distance minimale de 20 cm entre le radiateur et
votre corps.
Safety Instrucon
These instrucons are intended to ensure that a user can use the product correctly to avoid
danger or property loss.
The precauon measure is divided into “Warnings” and “Cauons”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cauons: Injury or equipment damage may occur if any of the cauons are neglected.
Warnings: Follow these
safeguards to prevent serious
injury or death.
Cauons: Follow these
precauons to prevent potenal
injury or material damage.
● Proper configuraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
● In the use of the product, you must be in strict compliance with the electrical safety regulaons
of the naon and region. Please refer to technical specificaons for detailed informaon.
● Do not connect several devices to one power adapter as adapter overload may cause
over-heang or a fire hazard.
● Please make sure that the plug is firmly connected to the power socket. When the product is
mounted on wall or ceiling, the device shall be firmly fixed.
● If smoke, odor, or noise rise from the device, turn off the power at once and unplug the power
cable, and contact the service center.
Name
Descripon
7
Warnings
● Make sure the power supply voltage is correct before using the camera.
● Do not drop the camera or subject it to physical shock.
● Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of
ethanol and wipe it gently. If the camera will not be used for an extended period, replace the lens
cap to protect the sensor from dirt.
● Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur (which
is not a malfuncon), and affect the sensor’s endurance at the same me.
● The sensor may be burned out by a laser beam, so when any laser equipment is in use, make
sure that the surface of sensor will not be exposed to the laser beam.
● Do not place the camera in extremely hot, cold (the operang temperature shall be -10°C to
+40°C), dusty, or damp locaons, and do not expose it to high electromagnec radiaon.
● To avoid heat accumulaon, ensure that there is good venlaon to the device.
● Keep the camera away from liquids.
● While in delivery, pack the camera in its original, or equivalent, packing, packing materials. Or
packing of the same texture.
● Regular part replacement: a few parts (e.g. electrolyc capacitor) of the equipment shall be
replaced regularly according to their average endurance. The average me varies because of
differences between operang environments and usage history, so regular checking is
recommended for all users. Please contact your dealer for more details.
● Improper use or replacement of the baery may result in hazard of explosion. Replace with the
same or equivalent type only. Dispose of used baeries according to the instrucons provided by
the baery manufacturer.
● If the product does not work properly, please contact your dealer or the nearest service center.
Never aempt to disassemble the camera yourself. (We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.)
Cauons
1
Open the cover to expose the memory card
slot, and insert the memory card.
2
Install the removable cover back.
3
Microphone
Status
Indicator
Lens
Speaker
RJ-45
Self-Adapve
Ethernet Port
Power Input
Memory Card Slot
WPS/RESET
Silicone Gasket
Removable Cover

Har du et spørgsmål om HiLook IPC-P120-D/W?

Stil et spørgsmål, du har om HiLook IPC-P120-D/W til andre produktejere. Giv en klar og omfattende beskrivelse af dit problem. Jo bedre dit problem beskrives, jo lettere er det for andre HiLook IPC-P120-D/W ejere, at give dig et godt svar.

Specifikationer

Mærke HiLook
Model IPC-P120-D/W
Produkt Overvågningskamera
EAN 6954273665456
Sprog Engelsk
Produktgruppe Overvågningskameraer
Filtype PDF
Kamera
Panorering, rækkevidde 0 - 355
Hældninginterval -10 - 90
Minimumsbelysning 0
Betragtningsvinkel (vandret) 105.8
Kamera lukkehastighed 1/3 - 1/100000
Netværk
Understøttede netværksprotokoller TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, RTP, RTSP, RTCP, NTP, UPnP, IGMP, QoS, IPv6, Bonjour, SMTP, 802.1x
Ethernet LAN
Wi-Fi
Bluetooth
Wi-Fi-standarder 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Frekvensbånd 2.4 - 2.4835
Servicekvalitet support (QoS)
Antal brugere 32
Præstation
Forbindelsesteknologi Kabel & trådløs
Type IP-sikkerhedskamera
Understøttet placering Indendørs
Bred dynamisk område (WDR)
Dag/nat funktion
Infrarød (IR) cut-off filter
Porte & Grænseflader
Ethernet LAN (RJ-45) porte 1
Grænseflade RJ-45
Strømstyring
Strømkildetype DC, USB
Strømforbrug (maks.) 7
DC-udgang Ampère 1.4
DC udgangsspænding 5
Vægt & størrelser
Højde 120.9
Diameter 87.5
Vægt 295
Pakkevægt 511
Bredde (emballage) 216
Dybde (emballage) 121
Højde (emballage) 118
Nattesyn
LED type IR
Nattesyn
Nattesyn, afstand 10
Design
Formfaktor Terning
Farve på produkt Hvid
Monteringstype Skrivebord
Materiale kabinet Plast
Lyd
Indbygget mikrofon
Prøvehastighed 16
Indbyggede højttaler(e)
Stemme-codecs G.711, G.722.1, G.726, MP2L2
Video
Maks. opløsning 1920 x 1080
Video kompressionsformater H.264
Understøttede grafikopløsninger 320 x 240, 352 x 240, 352 x 288, 640 x 480 (VGA), 704 x 480, 704 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Automatisk forstærkningskontrol
Samlet megapixels 2
Fuld HD
Justering af billedkvalitet Brightness, Contrast, Saturation, Sharpness
Fortrolighedspolitik maskering
Bit-rate 32 Kbps - 8Mbps
Bagfrakommende lys-kompensation
Digital Wide Dynamic Range (DWDR)
3D NR (støjreduktion)
Administrationsfunktioner
Webbrowser
Knap til nulstilling
Billedsensor
Billedsensor CMOS
Størrelse på optisk sensor 1/2.8 2011-05-04 11:27:54 2012-06-08 13:40:02 9470 17 7 kg 2011-03-02 13:29:27 2012-06-08 13:40:02 9471 18 7 Mhz 2011-03-02 13:29:27 2012-06-08 13:40:02 9472 21 7 x 2011-03-02 13:29:27 2012-06-08 13:40:02 9473 22 7 Kbit/s 2011-03-02 13:29:27 2012-06-08 13:40:0
Progressiv skan
Driftsbetingelser
Driftstemperatur (T-T) -10 - 40
Linsesystem
Maksimal aperture 2
Minimum blændeåbning 1.2
Fast fokallængde 2.8
Emballage indhold
Antal kameraer 1
Sikkerhed
Beskyttelse af adgangskode
Bevægelsessensor (video)
Aktiv manipulering af alarm
IP-adresse filtrering
Sikkerhedsalgoritmer WEP, WPA, WPA-PSK, WPA2, WPA2-PSK, WPS
Anti-flimmer
Hjerteslag
Spejl
Digitalt vandmærke
Lagring
Indbygget kortlæser
Kompatible hukommelseskort MicroSD (TransFlash), MicroSDHC, MicroSDXC
Indbygget harddisk -
Maksimal størrelse på hukommelseskort 128