Grundig Business Systems GmbH
Weiherstraße 10, D-95448 Bayreuth, Germany
This digital recording device is destined for recording and playback of speech and music.
Make sure that the device is protected from moisture (rain, water splash, spray water). Do not place the Diginotice directly
rendered null and void if the device has been opened. For cleaning, use a dry cloth. Do not use chemical cleaning agents.
The batteries may not be disposed of with domestic waste. Consumers are obliged by law to return batteries or rechargeable
batteries at the end of their service lives to the public collecting points at public waste disposal authorities or point of sale
to the relevant guidelines of the European Union.
Scope of delivery
Start-up, Switch of
f, Key lock
AAA (LR03) alkaline batteries into the battery case and make sure that the polarity is correct.
The batteries have to be changed when the battery symbol in the display blinks, and when 3 audible warning
signals can be heard. Device turns into the power save function mode.
First of all, please set the clock time - for more details see „Menu, Settings - T
Power Save Function Mode
or recording of notes or music).
Allkeysarelockedaslongasthekey-lockisactive.Thesymbol appears in the
The Diginotice is provided with 3 modes: note, music play-back and for using it as a removable disc (memory
return to the note mode.
Press the REC button to start the recording. Then the note number and „Record“ appears in the display
length (in seconds) of the note is shown by means of a progress bar in the display
Press the REC button or the Jog-Dial to interrupt the recording („pause“). The note length indicator blinks.
Press the REC button again or the Jog-Dial to continue the recording.
End of Recording
Select the note which shall be replayed by turning the Jog-Dial. Then press the Jog-Dial.
After this, the note is
The play-back can be interrupted by pressing the Jog-Dial. The function „Pause“ appears in the display
back of the note.
Fast Forward and Rewind
Push the Jog-Dial up or down in the pause mode to wind fast forward or to rewind. The longer the Jog-Dial is
kept pressed, the faster the winding.
MP3-Player / Music Mode
Selecting Song T
The number of songs, the active song number is shown in the display window as well as the title. Select the
chosen title by turning the Jog-Dial.
Playback of Song T
Press the Jog-Dial to start the song. The symbol
pops up; the runtime of the title is displayed. Press the
Press the Jog-Dial to stop the song and to access the pause mode. The symbol
pops up. Press the Jog-Dial
again to continue play-back.
Fast Forward- and Rewind Mode
urn the Jog-Dial up or down in the pause- or play mode to wind fast forward or to rewind. The longer the Jog-
Dial is kept pressed, the faster the winding.
Pressing of the REC button enters automatically the note mode. The recording of a note starts.
setting appears in the upper right edge of the display
The active settings are displayed above in the middle of the display
device is displayed on the workstation as a removable disk now
, and the data can be transferred between the
Diginotice and the PC. Copy your songs (MP3, WMA) into the main folder „removable disk“. Y
our notes are
stored in the folders
A to F .
the middle of the display window
raceBufferstoresadesiredtimesegment(point A uptopointB)withinanaudioleandrepeatsit
. Press the REC button to set the starting point of the time segment, „A“ appears in the display .
Press the REC button again to set the end of the time segment, „A-B“ appears in the display
. Then the segment
A andBoftheaudioleisrepeatedconstantly .PresstheRECbuttonagaintodeletethemarked
time segment, the „A-B“ indication in the display disappears.
race Buffer is available in the note and music mode.
Deleting a Note / Deleting a Song
Press the „DEL“ button. The function „Del File“ apears in the display and below „DEL“ and „EXIT
.“ Select the
Deleting all Notes of a Folder / Deleting all Songs
Press the „DEL“ button around 2 seconds until the function „Del
All“ blinks in the display and below „DEL“
Bit Rate (Recording quality)
audio data. It is possible to select between 32K, 64K (mono) and 96K, 128K (stereo).
The higher the bit rate, the better the quality but the more of the main storage is used.
In the menu SENSE are 3 levels available to set the sensitivity of the microphone or the sensitivity is controlled
automatically by the device.
In this menu the voice activation is switched on or off. The voice activation stops automatically the recording
during a speech- and silence period until the speech is continued. T
urn up shortly the Jog-Dial again to set the
sensitivity of the voice activation. (01...insensitive, 27... very sensitive)
a music title from a PC.
In this menu, the time as well as the date can be set in the formats:
Day-month-year and hours-minutes-seconds.
Dial up or down.
folder by means of the Jog-Dial to access the submenu. Select the desired folder by means of the Jog-Dial.
Then the selected folder appears in the upper right edge of the display
This menu shows the total, used and free memory space.
Select the display language: English, German or French.
Display of the Firmware V
displayed in the start screen.
Batteries,2x1,5V , AAA(LR03)
MP3, bitrates 32, 64, 96, 128 kbit/sec
English, German, French
Earphone (jack 3.5 mm, stereo) impedance over 16 ohms
* Recording time will be varied by the bit rate setting
estwith Alkalinebatteries.Y oumaynddifferentbatterylifetimewhenusingdifferentbrandofbatteryandvolumelevel.
Notes - Scope of delivery - User controls
MP3-Player / Music Mode
Removable Disk - Play-Back Settings - Deleting Menu, Settings FirmwareV ersion-Specications
Jack for earphone EAR
Record button REC
Jog-Dial PLA Y/P AUSE,
fast forward and rewind
Delete button DEL
1. Recording indicator