Breo Orb manual

Breo Orb
10 · 1
PDF manual
 · 1 side
Engelsk
manualBreo Orb

Instructions Manual (English)

CHANGING THE MODE

From Normal Time mode;
Hold S1 to display the Date and Month. While holding S1, press S2 to change the date
display (Date/Month or Month/Date)
Hold S2 to display the Alarm time. While holding S2, press S1 to toggle the Alarm
chime and Hour chime on and off.
Press S3 to enter Chronograph mode. Press S3 again to return to Normal Time mode.
Hold S2. Press S3 to toggle between 12hr and 24hr mode.

SETTING THE TIME / CALENDAR

From Normal Time mode, hold S3 for three seconds;
The Alarm Hour will flash.
Press S3 again to enter Time setting.
The Seconds will flash. Set to ’00’ with S2.
Press S1. The Minutes will flash. Advance with S2.
Press S1 again. The Hour will flash. Advance with S2.
Press S1 again. The Month will flash. Advance with S2.
Press S1 again. The Date will flash. Advance with S2.
Press S1 again. The Day of the Week will flash. Advance with S2.
Press S3 to return to Normal Time mode.

USING THE CHRONOGRAPH

From Normal Time mode, press S3 to enter Chronograph mode;
Press S1 to start counting.
Press S1 again to stop counting.
Press S2 to reset to ’00’.
Lap function. While the timer is counting, press S2 for first split time. (The numbers
stop flashing, but the chronograph is still counting) Press S2 again to return to the
timer. Repeat this for as many laps as you wish.
Press S1 to stop counting. Press S2 to reset to ’00’.

SETTING THE ALARM

From Normal Time mode, hold S3 for three seconds to enter Alarm setting;
The Alarm Hour will flash. Advance with S2.
Press S1. The Alarm Minutes will flash. Advance with S2.
Press S3 to return to Normal Time mode.

FEATURES & SPECIFICATIONS

Maximum depth range: 10 ATM
Accuracy at normal temperature; not more than 30 seconds a month
Time keeping mode: hours, minutes, seconds, month, date, day of week, ‘PM’ (Only
available in 12 hour format)
Alarm mode: daily alarm
Timer mode: Measuring unit - 1 second. Input range: 1 second - 23:59’:59”
Chronograph mode: Measuring unit - 1/100 second. Measuring capacity - 23:59’:59
Normal operating temperature range - 10˚C + 40˚C

Worldwide Warranty

Thanks for choosing a Breo watch. We warrant this item for 24 months

Worldwide from the date of purchase for all constructing defects. We are not

responsible for any damage caused by inappropriate use. From the warranty

are excluded: Glass, strap & battery. The development of a malfunction does not

imply the extension of the 24 months warranty period.

Once a malfunction occurs, the consumer can contact the retailer where the

watch was purchased whom will take care of warranty obligations.

If it is not possible to contact the reseller, simply send email to our customer

service info@breo.com with all your contact information, and proof that the

watch was purchased no more than 24 months earlier.

1
ATM
3
ATM
5
ATM

10/20

ATM

Love your Breo and it will love you!

Please be aware of the following when you first receive your Breo watch:

• This watch contains precise electronic components. Never attempt to open or
remove the back cover.
Do not operate push buttons below the surface of the water when swimming
or diving.
Should water or condensation appear in the watch, immediately have the watch
checked. Water can corrode electronic parts inside the case.
Avoid exposing the temperature extremes.
Clean the watch with a soft cloth and clean water only. Avoid using chemicals,
especially soap.
Keep your watch away from the conditions of strong electric fields and static
electricity.
It is recommended to take your watch to a repair shop to change the battery.

Se manualen til Breo Orb her gratis. Denne vejledning hører under kategorien Ure og er blevet bedømt af 1 personer med et gennemsnit på en 10. Denne manual er tilgængelig på følgende sprog: Engelsk. Har du et spørgsmål om Breo Orb eller har du brug for hjælp? Stil dit spørgsmål her

Brug for hjælp?

Har du et spørgsmål vedrørende Breo og svaret er ikke i manualen? Stil dit spørgsmål her. Giv en klar og udførlig beskrivelse af problemet og dit spørgsmål. Jo bedre dit problem beskrives, jo lettere er det for andre Breo ejere, at give dig et godt svar.

Mette Fermi-Erichsen • 9-12-2019Ingen kommentarer

jeg kan ikke stille flere lysstyrker via nodes kun via tlf. og kan ikke have begge tændt samt kan ikke finde ud at slette den igen via tlf. og kun bruge nodes

Besvar dette spørgsmål

Antal spørgsmål: 1

Generelt
Breo
Orb
Ur
Engelsk
Brugermanual (PDF)

Kan du ikke finde svaret på dit spørgsmål i manualen? Du kan muligvis finde svaret på dit spørgsmål i ofte stillede spørgsmål her Breo Orb under.

Er dit spørgsmål ikke angivet? Stil dit spørgsmål her

Ingen resultater