Bosch SuperSilence SMI53M75EU manual
8.6 · 5
Manual
Se manualen til Bosch SuperSilence SMI53M75EU her gratis. Denne vejledning hører under kategorien Opvaskemaskiner og er blevet bedømt af 5 personer med et gennemsnit på en 8.6. Denne manual er tilgængelig på følgende sprog: Engelsk. Har du et spørgsmål om Bosch SuperSilence SMI53M75EU eller har du brug for hjælp? Stil dit spørgsmål her
Oversigt
- ( Safety instructions 4
- 7 Protection of the environment 9
- * Getting to know your appliance 9
- + Water softening system/ Special salt 10
- , Rinse aid 11
- - Utensils 13
- . Detergent 17
- / Overview of programmes 19
- 0 Additional options 20
- 1 Operating the appliance 21
- 2 Cleaning and maintenance 24
- 3 Fault, what to do? 26
- 4 Customer service 35
- 5 Installation and connection 35
- 8 Intended use
- Intended use
- ( Safety instructions
- Children from 8 years of age or people whose physical, sensory or mental abilities or their lack of experience or knowledge prevent them from using the appliance safely must not use this appliance without supervision or instruction by a responsible p...
- Please read the operating and installation instructions carefully. They contain important information on how to install, use and maintain the appliance.
- Retain all documents for subsequent use or for the next owner.
- Delivery
- 1. Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier.
- 2. Please dispose of the packaging material in an environmentally friendly manner.
- 3. Do not let children play with packaging and its parts. There is a risk of suffocation from collapsible boxes and film.
- 1. Check the packaging and dishwasher immediately for damage caused in transit. Do not switch on a damaged appliance, but contact your supplier.
- Installation
- In daily use
- Childproof lock (door lock)Door lock *
- Childproof lock (button lock)Button lock
- You can secure your appliance from being unintentionally the programme terminated (e.g. improper operation by children).
- Activating the button lock:
- If any button is pressed while the programme is running, this ’– is indicated on the digital display. It is not possible to end (Reset) the programme.
- Deactivating the button lock:
- When the programme ends (‹:‹‹ on the digital display), the button lock is cancelled. If there is a power failure, the button lock is retained. Whenever a programme is restarted, the button lock must be reactivated.
- You can secure your appliance from being unintentionally the programme terminated (e.g. improper operation by children).
- Damage
- Disposal
- 1. Make redundant appliances unusable to prevent subsequent accidents.
- 2. Dispose of the appliance in a n environmentally friendly manner.
- m Warning
- Risk of injury!
- ■ To prevent injuries, e.g. caused by stumbling, open the dishwasher only briefly in order to load and unload the dishwasher.
- ■ Knives and other utensils with sharp points must be placed in the cutlery basket with the points downwards or horizontally on the knife shelf*.
- ■ Do not lean or sit on the open door.
- ■ In the case of free-standing appliances, ensure that the baskets are not overloaded.
- ■ If the appliance is not in a cavity and a side panel is accessible, the door hinge area must be covered at the side for reasons of safety (risk of injury). The covers are available as optional accessories from customer service or specialist outlets.
- ■ If fitted, use the childproof lock. An exact description can be found in the back of the enve lope.
- ■ Do not allow children to play with or operate the appliance.
- ■ Keep children away from detergents and rinse aid. These may cause chemical burns in the mouth, throat and eyes or asphyxiation.
- ■ Keep children away from open dishwasher. The water in the rinsing compartment is not drinking water and could contain detergent residue.
- ■ Ensure that children do not place fingers in the tablet collecting tray 12. Small fingers could become caught in the slots.
- ■ When opening and closing the door on an eye-level appliance, ensure that children do not become jammed or crushed between the appliance door and the cupboard door below.
- ■ Children could become locked in the appliance (danger of suffocation) or get into another dangerous situation.
- 1. Make redundant appliances unusable to prevent subsequent accidents.
- 7 Protection of the environment
- Protection of the environment
- Both the packaging of new appliances and the old appliances themselves contain valuable raw materials and recyclable materials.
- Please dispose of the individual parts separated according to type.
- Please ask your dealer or inquire at your local authority about current means of disposal.
- All plastic parts of the appliance are identified with internationally standardised abbreviations (e.g. >PS< polystyrene). Therefore, plastic waste can be sorted out when the appliance is being disposed of.
- Please follow the safety instructions under “Delivery”.
- Old appliances
- Please follow the safety instructions under “Disposal of your appliance”.
- This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling o...
- Please follow the safety instructions under “Disposal of your appliance”.
- Protection of the environment
- * Getting to know your appliance
- Getting to know your appliance
- Diagrams of the control panel and the interior of the appliance can be found in the envelope at the front.
- Individual positions are referred to in the text.
- ON/OFF switch
- Programme buttons **
- Door opener
- Timer programming *
- Additional options **
- START button
- Display “Check water supply”
- Salt refill indicator
- Rinse aid refill indicator
- Digital display
- * depending on model
- ** Number depending on model
- Appliance interior
- Overview of menu
- Getting to know your appliance
- + Water softening system/Special salt
- Water softening system/Special salt
- To ensure good washing results, the dishwasher requires soft water, i.e. containing low amounts of lime, otherwise white limescale will be deposited on the utensils and inner container.
- Tap water above 1.2 mmol/l must be softened. The water is softened with special salt (regeneration salt) in the water softening system of the dishwasher.
- The setting and therefore the required amount of salt depends on the degree of hardness of your tap water (see table).
- The amount of salt dispensed can be set from •:‹‹ to •:‹ˆ.
- Salt is not required at the set value •:‹‹.
- 1. Find out about the hardness value of your tap water. Your water utility company will help you with this.
- 2. Set value can be found in the water hardness table.
- 3. Close the door.
- 4. Switch on ON/OFF switch (.
- 5. Hold down programme button # and press START button P until •:‹.... is indicated on the digital display.
- 6. Release both buttons.
- To change the setting:
- 1. Find out about the hardness value of your tap water. Your water utility company will help you with this.
- Water hardness table
- Using special salt
- Using detergents with salt componentDetergents with salt component
- Switching off salt refill indicator/water softening systemSwitching off water softening system
- Water softening system/Special salt
- , Rinse aid
- Rinse aid
- As soon as the rinse-aid refill indicator h is lit on the fascia, there is still a rinse-aid reserve of 1-2 rinsing processes. Refill with rinse aid.
- The rinse aid is required for stain-free utensils and clear glasses. Use only rinse aid for domestic dishwashers.
- Combined detergents with rinse-aid component may be used up to a water hardness of 21° dH (37° fH, 26° Clarke, 3.7 mmol/l) only. If the water hardness is over 21° dH, rinse aid must be used.
- 1. Open the dispenser 1j by pressing and lifting the plate on the cover.
- 2. Carefully pour rinse aid up to the max. mark in the filler opening.
- 3. Close cover until it clicks shut.
- 4. To prevent excessive foam formation during the next rinse cycle, remove any rinse aid which has run over with a cloth.
- Setting amount of rinse aid
- 1. Open the dispenser 1j by pressing and lifting the plate on the cover.
- The amount of rinse aid can be set from §:‹‹ to §:‹‡. Please set rinse aid on §:‹† to obtain very good drying results (§:‹† is already set in factory).
- Change this setting, only if streaks (select lower setting) or water stains (select higher setting) are left on the utensils.
- 1. Close the door.
- 2. Switch on ON/OFF switch (.
- 3. Hold down programme button # and press START button P until •:‹.... is indicated on the digital display.
- 4. Release both buttons.
- 5. Press programme button # until the factory set value §:‹† is indicated on the digital display )".
- To change the setting:
- 1. Close the door.
- Switching off rinse aid refill indicator
- Rinse aid
- - Utensils
- Utensils
- Not suitable
- Aluminium and silver parts have a tendency to discolour and fade during the wash cycle. Even some types of glass (e.g. crystal glass objects) may turn cloudy after many wash cycles.
- Glass and utensil damage
- Loading the dishwasher
- Unloading the dishwasher
- To prevent water from dripping off the upper basket onto the utensils in the lower basket, it is recommended to empty the appliance from the bottom up.
- Hot utensils are sensitive to shock! Therefore, when the programme ends, leave the utensils to cool down in the dishwasher until they can be handled.
- To prevent water from dripping off the upper basket onto the utensils in the lower basket, it is recommended to empty the appliance from the bottom up.
- Cups and glasses
- Pans
- Cutlery basket
- EtagereEtagere *
- The etagere and the space underneath can be used for small cups and glasses or for larger items of cutlery, such as wooden spoons or serving cutlery. The etagere can be folded up if not required.
- * Depending on the model, a 3-fold height adjustment is possible. To do this, first place the etagere vertically and pull up, then place at a slight angle, push down to the required height (1, 2, or 3) and snap into place.
- The etagere and the space underneath can be used for small cups and glasses or for larger items of cutlery, such as wooden spoons or serving cutlery. The etagere can be folded up if not required.
- Folding spikesFolding spikes *
- Small accessories holder *Small accessories holder
- Knife shelf *Knife shelf
- Adjusting the height of the basketAdjusting the height of the basket *
- Top basket with side levers
- 1. Pull out the top basket 1" out.
- 2. To lower the basket, press in the left and then the right lever on the outside of the basket. In doing so, hold the sides of the basket along the upper edge to prevent it from suddenly dropping.
- 3. To raise the basket, hold the basket on the sides of the upper edge and lift it up.
- 4. Before re-inserting the basket again, ensure that it is at the same height on both sides. Otherwise, the appliance door cannot be closed and the upper spray arm will not be connected to the water circuit.
- 1. Pull out the top basket 1" out.
- Top basket with upper and lower roller pairs
- Utensils
- . Detergent
- Detergent
- You can use tablets as well as powder or liquid detergents for dishwashers, but never use washing up liquid. The dosage can be individually adjusted with powder or a liquid detergent according to the degree of soiling. Tablets contain an adequately l...
- Adding detergent
- Combination detergent
- Apart from conventional detergents (Solo), a number of products are offered with additional functions. These products contain not only the detergent but also rinse-aid and salt replacement substances (3in1) and, depending on the combination (4in1, 5i...
- As soon as combined detergents are used, the rinse programme is adjusted automatically to ensure the best possible rinsing and drying result.
- Apart from conventional detergents (Solo), a number of products are offered with additional functions. These products contain not only the detergent but also rinse-aid and salt replacement substances (3in1) and, depending on the combination (4in1, 5i...
- Detergent
- Intended use
- / Overview of programmes
- Overview of programmes
- The max. possible number of programmes is illustrated in this overview. The corresponding programmes and their arrangement can be found on the fascia.
- * The Intensive Smart 45° programme offers outstanding cleaning results even if utensils are heavily soiled. And this with an energy saving of up to 25% compared with the Intensive 70° programme.
- To benefit from these advantages, please use modern detergents which deploy their full cleaning power from 45 °C. These detergents are identified by the manufacturers accordingly.
- Programme selection
- Information for test institutes
- Test institutes receive the information for comparability tests (e.g. according to EN60436).
- These are the conditions for conducting the tests, however these are not the results or consumption values.
- Request by e-mail to:
- dishwasher@test-appliances.com
- The product number (E no.) and the production number (FD) are required which you can find on the rating plate 92 on the appliance door.
- Test institutes receive the information for comparability tests (e.g. according to EN60436).
- 0 Additional options
- Additional options
- * depending on model
- Additional options can be set with the buttons H.
- This function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The change in the running time is indicated on the digital display )". To obtain optimum cleaning results at a reduced running time, water and ...
- Half load§ Half load *
- · Hygiene *Hygiene
- Ï Intensive zone *Intensive zone
- ¿ Extra drying *Extra drying
- Additional options
- 1 Operating the appliance
- Operating the appliance
- Programme data
- The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value •:‹…. Different influencing factors such as e.g. water temperature or line pressure may result...
- Aqua sensorAqua sensor *
- * depending on model
- The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water.
- The Aqua sensor is used according to the programme. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by 3–6 litres. If the turbidity is greater, the water is drai...
- * depending on model
- Switching on the appliance
- Remaining running time display
- When the programme is selected, the remaining running time of the programme is indicated on the digital display )".
- The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme).
- When the programme is selected, the remaining running time of the programme is indicated on the digital display )".
- Timer programmingTimer programming *
- * depending on model
- You can delay the start of the programme in 1-hour steps up to 24 hours.
- 1. Close the door.
- 2. Switch on ON/OFF switch (.
- 3. Press button @ + until the digital display )" jumps to œ:‹‚.
- 4. Press @ + or – button until the displayed time corresponds with your requirements.
- 5. Press START button P, timer programming is activated.
- 6. To delete timer programming, press the @ + or – button until )" œ:‹‹ is indicated on the digital display.
- 1. Close the door.
- * depending on model
- End of programme
- Switching off automatically after the end of the programme *Switching off automatically after the end of the programme
- * depending on model
- To save energy, the dishwasher is switched off 1 minute after the programme ends (factory setting).
- Automatic disconnection can be adjusted from ˜:‹‹ to ˜:‹ƒ.
- Appliance does not switch off automatically
- Off after 1 min
- Off after 120 min
- 1. Close the door.
- 2. Switch on ON/OFF switch (.
- 3. Hold down programme button # and press START button P until •:‹... is indicated on the digital display.
- 4. Release both buttons.
- 5. Press programme button # until the factory set value ˜:‹‚ is indicated on the digital display )".
- To change the setting:
- 1. Close the door.
- * depending on model
- Switching off the appliance
- Interrupting the programme
- Terminating the programmeTerminating the programme (Reset)
- Changing the programme
- Intensive drying
- The final rinse uses a higher temperature which improves the drying result. The running time may increase slightly. (Caution if utensils are delicate!)
- 1. Close the door.
- 2. Switch on ON/OFF switch (.
- 3. Hold down programme button # and press START button P until the digital display )" •:‹... is indicated.
- 4. Release both buttons.
- 5. Press programme button # until the factory set value š:‹‹ is indicated on the digital display )".
- To change the setting,
- 1. Close the door.
- Operating the appliance
- 2 Cleaning and maintenance
- Cleaning and maintenance
- A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems.
- If you find such deposits:
- Clean the appliance with detergents/ appliance cleaners which are particularly suitable for use with dishwashers.
- Never use a steam cleaner to clean your dishwasher. The manufacturer is not liable for any consequential damage.
- Regularly wipe the front of the appliance and fascia with a damp cloth; water and a little washing up liquid are adequate. Do not use sponges with a rough surface or abrasive detergents, as these could scratch the surfaces.
- Stainless steel appliances: To prevent corrosion, avoid using sponge cloths or wash them out thoroughly several times before using for the first time.
- Special salt and rinse aid
- Filters
- The filters 1R keep large foreign objects in the rinsing water away from the pump. These foreign objects may occasionally block the filters.
- The filter system consists of a coarse filter, a flat fine filter and a microfilter.
- 1. After each washing cycle check the filters for residue.
- 2. Unscrew filter cylinder as illustrated and take out filter system.
- 3. Remove any residue and clean filters under running water.
- 4. Re-install filter system in reverse sequence and ensure that the arrow marks are opposite each other after closing the filter system.
- 1. After each washing cycle check the filters for residue.
- The filters 1R keep large foreign objects in the rinsing water away from the pump. These foreign objects may occasionally block the filters.
- Spray arms
- Cleaning and maintenance
- 3 Fault, what to do?
- Fault, what to do?
- Experience has shown that you can rectify most faults which occur in daily operation yourself. This ensures that the machine is quickly available to you again. In the following overview you can find possible causes of malfunctions and helpful informa...
- Waste water pump
- Large food remnants or foreign objects which were not captured by the filters may block the waste water pump. The rinsing water will then be above the filter.
- In this case:
- 1. First always disconnect the appliance from the power supply.
- 2. Take out top basket 1" and bottom basket 1b.
- 3. Remove the filters 1R.
- 4. Scoop out water, use a sponge if required.
- 5. Prise out the white pump cover (as illustrated) using a spoon. Grip the cover on the crosspiece and lift diagonally inwards. Remove cover completely.
- 6. Check impeller wheel and remove any foreign objects.
- 7. Place cover in the original position and press down until it engages (click).
- 8. Install filters.
- 9. Re-insert baskets.
- Fault table
- 1. First always disconnect the appliance from the power supply.
- Fault, what to do?
- 4 Customer service
- Customer service
- If you are unable to rectify the fault, please contact your customer service. We always find a suitable solution, even to avoid unnecessary visits by technicians. Contact information for your nearest customer service can be found on the back of these...
- Rely on the competence of the manufa cturer. Contact us. You can therefore be sure that the repair is carried out by trained service technicians who carry original spare parts for your domestic appliances.
- * depending on model
- Customer service
- 5 Installation and connection
- Installation and connection
- The dishwasher must be connected correctly, otherwise it will not function properly. The specifications for the inlet and outlet as well as the electrical connected loads must correspond with the required criteria as specified in the following paragr...
- Install the appliance in the correct sequence:
- If you have any complaints, contact the dealer where you purchased the appliance or our customer service.
- * depending on model
- Safety instructions
- Delivery
- Technical specifications
- Weight:
- max. 60 kg
- Voltage:
- 220–240 V, 50 Hz or 60 Hz
- Connected load:
- 2.0–2.4 kW
- Fuse:
- 10/16 A (UK 13A)
- Power input:
- switched off 0.10 W
- not switched off 0.10 W
- Water pressure:
- at least 0.05 MPa (0.5 bar), maximum 1 MPa (10 bar). At a higher water pressure: connect pressure-reducing valve ahead.
- Inlet rate:
- minimum 10 litres/minute
- Water temperature:
- cold water; hot water max. temperature 60 °C.
- Capacity:
- 12–15 place settings (depending on model).
- Weight:
- Installation
- Waste-water connection
- Drinking water connection
- 1. Fasten the drinking water connection to the tap according to the installation instructions using the enclosed parts.
- 2. When replacing the appliance, always use a new water supply hose.
- Water pressure:
- At least 0.05 MPa (0.5 bar), maximum 1 MPa (10 bar). At a higher water pressure: connect pressure-reducing valve ahead.
- Inlet rate:
- Minimum 10 litres/minute
- Water temperature:
- Cold water; hot water max. temperature 60 °C.
- 1. Fasten the drinking water connection to the tap according to the installation instructions using the enclosed parts.
- Warm water connection *Warm water connection
- * depending on model
- The dishwasher can be connected to cold or hot water up to max. 60 °C.
- Connection to hot water is recommended if the hot water can be supplied by energetically favourable means and from a suitable installation, e.g. solar heating system with circulation line.
- This will save energy and time.
- The hot water setting ‘:‹‚ allows you to adjust your appliance optimally to operation with hot water.
- It is recommended to have a water temperature (temperature of the incoming water) of at least 40 °C and no more than 60 °C.
- It is not recommended to connect the appliance to hot water if the water is supplied from an electric boiler.
- * depending on model
- Electrical connection
- Removing the appliance
- Transportation
- Empty the dishwasher and secure loose parts.
- Drain the appliance according to the following steps:
- 1. Turn on the tap.
- 2. Close the door.
- 3. Switch on ON/OFF switch (.
- 4. Select programme with the highest temperature.
- 5. Press START button P.
- 6. After approx. 4 minutes press the START button P until ‹:‹‚ is indicated on the digital display.
- 7. Switch off ON/OFF switch (.
- 8. Turn off the tap, disconnect supply hose and drain water.
- 1. Turn on the tap.
- Transport appliance upright only.
- (This prevents residual water from running into the machine control and damaging the programme sequence.)
- Protection against frostProtection against frost (Emptying the appliance)
- Installation and connection
- Overview of programmes
Bosch SuperSilence SMI53M75EU specifikationer
Nedenfor finder du produktspecifikationerne og de manuelle specifikationer for Bosch SuperSilence SMI53M75EU.
Generelt
| Mærke | Bosch |
| Model | SuperSilence SMI53M75EU |
| Produkt | Opvaskemaskine |
| Sprog | Engelsk |
| Filtype | Brugermanual (PDF) |
Ofte stillede spørgsmål
Kan du ikke finde svaret på dit spørgsmål i manualen? Du kan muligvis finde svaret på dit spørgsmål i ofte stillede spørgsmål her Bosch SuperSilence SMI53M75EU under.
Hvad kan jeg gør ved en ildelugtende opvaskemaskine?
Med en ildelugtende opvaskemaskine kan du gøre følgende:
- Rengør filtrene
- Rengør sprøjtearmene
- Rengør dørgummierne
- Gennemfør et varmt vaskeprogram
- Rengør den tomme maskine med opvaskemiddel
Skal jeg først skylle beskidte tallerkener?
Det anbefales ikke at skylle beskidte tallerkener, før de anbringes i opvaskemaskinen.
For maskinens livscyklus er det bedre at lægge beskidte tallerkener i opvaskemaskinen.
Fedt på de beskidte tallerkener er smøringen til pumpen i maskinen.
Hvor meget opvaskemiddel skal jeg bruge?
Den gennemsnitlige anvendte mængde er omkring 25 gram opvaskemiddel. Det anbefales at følge instruktionerne på emballagen.
Hvordan kan jeg genopfylde blødgøringssalt i min opvaskemaskine?
Hver opvaskemaskine har et separat rum til blødgøringssalt. Det åbnes, når du drejer på knappen til rummet. Blødgøringssaltet kan derefter hældes i rummet ved hjælp af en tragt.
Er brugsanvisningen til Bosch SuperSilence SMI53M75EU tilgængelig på Dansk?
Desværre har vi ikke brugsanvisningen til Bosch SuperSilence SMI53M75EU tilgængelig på Dansk. Denne brugsanvisning er tilgængelig på Engelsk.
Er dit spørgsmål ikke angivet? Stil dit spørgsmål her
Ingen resultater
Brug for hjælp?
Har du et spørgsmål vedrørende Bosch SuperSilence SMI53M75EU og svaret er ikke i manualen? Stil dit spørgsmål her. Giv en klar og udførlig beskrivelse af problemet og dit spørgsmål. Jo bedre dit problem beskrives, jo lettere er det for andre Bosch SuperSilence SMI53M75EU ejere, at give dig et godt svar.
Der er vand i bunde efter vask, og stjernesymbolet lyser
Riser på glas
Hvad betyder fejlkode E22
Hvad betyder fejl E22
Hvad betyder E 22
Hvad betyder fejl E22
Hej Opvaskemaskine vil ikke starte- melder fejlkode E15
Hvad betyder fejlkode E 15
Hvad betyder fejlkode E15 den vil kun pumpe
Vi kan ikke starte opvaskemaskinen
Reservere knappen virker ikke
Hvad betyder E 22 på displayet? “Vandhanen” lyser rødt men den tager vand ind???
Hvad betyder E09
Hvad betyder “en vandhane” og kode E 15. Har fået en ny vandhane på og maskinen virkede i 30 minutter. Den står stadig og arbejder selv om lågen åbnes. Nu har jeg trukket stikket ud af stikkontakten.
Hvad betyder “en vandhane” og kode E 15. Har fået en ny vandhane på og maskinen virkede i 30 minutter. Den står stadig og arbejder selv om lågen åbnes. Nu har jeg trukket stikket ud af stikkontakten.
Den vil hverken lukke vand ind eller lukke det ud. Hvad kan jeg gøre
Den tænder. og kan ikke trække vand ind Så lyser den 000 Og slukker
Vi får nu blødere vand, 12 i hårdhedsgrad i stedet for 22! Kan man indstille opvaskeren efter det blødere vand?
Antal spørgsmål: 35